Decoration Glass Processing Sandblasting Machine.This machine is specially designed for making bevel on small glass (30x30mm) and big glass(3mx3m), it can also make 45 degree bevel edge.
The front conveyor track can be moved up and down according to glass size.
This machine adopt PLC control and operator interface. The Screen can show glass thickness, bevel angle, bevel width and back track height.
The machine is controlled by the PLC, suitable for processing 5-30mm thickness of flat glass and steric pattern. Glass is conveyed by the belts, when glass arrive to the place for sandblasting, the guns which are drive by belt will move up-and-down and spurt out sand. The height and the width of sandblasting can be adjusted according to the requirement. The advantages of the belts are stable transmission, high efficiency and easy maintenance. The drive structure of the sandblasting gun is outside the machine which make benefitd to a long period normal working and daily maintenance. The machine adopts the PLC for controlling, which brings easy operation and exploration the glass position automatically when sandblasting.
|
1600 mm height |
2000 mm height |
2500 mm height |
Height of conveyor |
550mm |
550mm |
550mm |
Height of the processing glass |
1500mm |
2000mm |
2500mm |
speed of sandblasting: |
12-15m²/h (when use Green carborundum) |
12-15m²/h (when use Green carborundum) |
12-15m²/h (when use Green carborundum) |
Compressed air: |
0.6~0.8Mpa(5m³/min) |
0.6~0.8Mpa(5m³/min) |
0.6~0.8Mpa(5m³/min) |
Size |
4700 × 1500 × 2300mm |
6800 × 1500 × 2800mm |
6800 × 1500 × 3300mm |
Total power: |
3.5kw |
3.5kw |
3.5kw |